This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Jiffi FAQ

Jiffi Portable Warmer

The Jiffi Bottle Warmer has been designed to fit most standrard 53mm "wide neck" bottles.The complete list of tested and approved bottles is listed below and in the User Manual.

Is your brand not here?

Don't stress we are working on an adapter that will be universal. Till then you can always purchase a singular bottle from the list below and just decanter!

Note: Some bottles require the seal to be inserted upside down - please check the user manual for this list.

List of compatible wide neck bottle brands:



Tommee Tippee (with adaptor)

Medela (with adaptor)

Dr Browns (with adaptor)



Nanobébé (with adaptor)

Como Tomo (with adaptor)





Snow Bear



Bebe Comfort



Yo Yo Monkey


Us Baby





Click here to be taken to a table which will give you an indication of how long bottle warming should take. Remember that the starting temperature of your bottled water and the outside temperature play a big role in heating times.

Important notes for Water Heating:

- Remember to charge your Jiffi overnight when you first recieve it

- Some adaptors may not work. Please try newer adaptors that are at least 2A/5V

- Always get Jiffi ready in anticipation of you baby waking to enjoy the comfort of knowing Jiffi will keep your bottle at the desired temperature for when bubs needs to feed

- If you are worried the battery may not maintain temperature for long enough, use the power cord or a suitable 1000mAh power bank to extend the warming capability

Once at the required temperature, Jiffi will retain the water temperature for up to 4 hours.

If connected to a power source, the Jiffi will maintain the selected temperature until unplugged and the battery runs out.

For full heating instructions and information, please refer to the User Manual - Time Reference Table.

Please note the Jiffi requires a 2A/5V adaptor (3A/5V for newer models). The requirement is in the manual and on our web site. If you find your Jiffi is not charging or heating when on charge as expected, please ensure your adaptor meets the charge requirements.

Trouble Shooting:

1. Add 120ml water to a bottle

2. Charge and remove power cable from your Jiffi

3. Ensure starting water temperature in 25 degrees

4. Set temp to 40 degrees

5. Time your heating process

6. Should warm in under 20 minutes

7. If successful - check page 7 of users manual for heating guide

8. If not successful contact

Note:The more water added the longer the heating timeThe colder the water the longer the heating timeThe colder the outside temperature, the longer the heating time

Provide the answer to the question here.

It is recommended that between every warming cycle, you remove the seal, clean the base product, dry and replace the seal ring. Ensure the seal is replaced correctly and creates a comfortable fit.Note: Some bottles require the seal ring to be placed in the upside down position to ensure correct seal.
List of bottle brands that require upside down seal ring placement:1. AVENT - PA Bottle/PP Bottle 2. Pigeon - PP Bottle3. CHU CHU - PP Bottle 4. Combi - PP Bottle5. UPIS - PPSU Bottle/PP Bottle 6. SpeCtra - PPSU Bottle/PP Bottle7. DoubleHeart - PP Bottle 8. Snow Bear - PPSU Bottle / PP Bottle9. Chicco - PP Bottle 10. Lansinoh - PP Bottle

The screen of the warmer is a two digit screen! 99% = Fully Charged

Replacement Seal Rings can be ordered from our website.Please visit our site at for any support enquiries.

Yes it is safe to travel with the Jiffi Portable Water Bottle Warmer in your carry on luggage.

Do not attach the bottle with water till you are airborne - there is a lot of bumping and bashing of carry on bags whislt transitting and the last thing you want is a wet bag to start your trip.

The change in cabin pressure whilst taking off and landing can cause a build up of pressure in the bottle and cause it to leak

Once airborne it is safe to attach the bottle for warming.

Only operate water bottle warmer when safe to do so.

Be mindful that the output on an aircraft USB charger is often not powerful to charge and heat a bottle., it is powerful enough to charge it.

Rochilou TOP TRAVEL TIP: If doing a long haul flight, we recommend plugging the Jiffi base into the USB output (with no bottle attached), then UNPLUG and pop your bottle on 30 mins before baby is due for a feed, that way it will definitely be ready even if baby is hungry earlier. Once warmed, feed baby and pop the charger back on. This way your warmer will stay fully charged and ready for any unexpected airport delays or transfers.

Formula Dispenser

Please click here to see the formula/water conversion table for Australian formula brands currently on the market.  

Please contact us at for any help regarding this table.

If you twist the white cap off the formula dispenser, there is a chance the clear cap of the formula dispenser may get traped under the white cap.


Use your index finger and thumb to remove the white cap from the clear cap. It is tricky but it will definitely be there.


Always pull the white cap off - don't twist.

Always twist the clear cap off - don't pull.

It is important to remember that formula is not liquid.

Steps to dispense formula powder correctly:

Step 1: Shake dispense while upside down to ensure nozzle is sufficiently full

Step 2: Depress the release button and shake the dispenser to ensure all formula is released

Step 3: Repeat as required

For full instructions, please refer to the User Manual

Jiffi Home Bottle Warmer

Jiffi Home can heat 120 ml breastmilk or water from room temperature (22 degrees) to 37 degrees in about 2 minutes.

NB: it takes longer if the water is much colder or if the volume is greater i.e. 240ml.

This is not recommended. Formula can create small burn marks on the warmer and are difficult to clean. We recommend warming water and keeping it at the correct temperature until baby is ready to feed. Remove from warmer and then add formula.

Yes, Jiffi Home includes 2 free adaptors:

1. Tommee Tippee - Fits TT wide neck bottles

2. Narrow Neck Adaptor - fits nanobébé, Medela, Dr Browns & Pigeon Narrow Neck

Jiffi Home can heat liquid to 37, 40, 45 or 50 degrees.

Jiffi will stop heating at the selected temperature and maintain the liquid at the desired temperature. It will hold that temp for 24 hours and then will switch off as a safety precaution.

No, Jiffi is designed to heat and maintain at safe temperatures for breastmilk (37 degrees celsius), thereby protecting breastmilk nutrients.